2014 Hilux · Service Manual TRANSMISSION

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT PISTON OPERATION OF OVERDRIVE BRAKE

AT08451E01
  1. Place the overdrive support assembly onto the direct clutch assembly.

  1. AT08149E01
    Apply compressed air (392 kPa (4 kgf/cm2, 57 psi)) into the oil passage, and check that the overdrive brake piston moves smoothly.


INSPECT OVERDRIVE BRAKE RETURN SPRING

D001246E01
  1. Using a vernier caliper, measure the free length of the spring together with the spring seat.

    Standard free length:
    17.03 mm (0.671 in.)

    If the length is not as specified, replace the spring.


INSPECT OVERDRIVE BRAKE CLUTCH DISC

AT06454E03
  1. Replace all discs if one of the following problems is present: 1) a disc, plate or flange is worn or burnt, 2) the lining of a disc is peeled off or discolored, or 3) grooves or printed numbers have even a little bit of damage.

    NOTICE:
    Before assembling new discs, soak them in ATF for at least 15 minutes.


INSPECT PISTON OPERATION OF OVERDRIVE BRAKE

AT08149E01
  1. Place the overdrive support assembly onto the direct clutch assembly.

  1. Apply compressed air (392 kPa (4 kgf/cm2, 57 psi)) into the oil passage as shown, and check that the overdrive brake piston moves smoothly.

← DISASSEMBLY (from Jun 2011)REASSEMBLY (from Jun 2011) →