DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
REMOVE LICENSE PLATE LIGHT ASSEMBLY
|
 |
Detach the 2 claws and remove the license plate light.
Disconnect the connector.
| 2.
REMOVE REAR BUMPER ARM LH |
 |
- Remove the 2 bolts and rear bumper arm.
| 3.
REMOVE REAR BUMPER ARM RH |
 |
- HINT:
- Use the same procedure described for the LH side.
| 4.
REMOVE REAR BUMPER PLATE |
 |
- Detach the 13 claws and remove the rear bumper plate.
| 5.
REMOVE REAR BUMPER PLATE LH |
 |
- Detach the 2 claws and remove the rear bumper plate.
| 6.
REMOVE REAR BUMPER PLATE RH |
 |
- HINT:
- Use the same procedure described for the LH side.
| 7.
REMOVE REAR BUMPER BAR PLATE |
 |
- Detach the 7 claws, and then remove the double-sided tape and rear bumper bar plate.
Text in Illustration
*1
|
Double-sided Tape
|