REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE FRONT FENDER SEAL |
Remove the 5 clips and seal.
| 3. DISCONNECT CLUTCH RELEASE CYLINDER ASSEMBLY (for Manual Transmission) |
![]() ![]() |
Remove the 2 bolts and disconnect the release cylinder.
| 4. REMOVE STARTER ASSEMBLY |
for A340F A340E:
Remove transmission oil filler tube sub-assembly.Remove the oil level dipstick.
Remove the 2 bolts and transmission oil filler tube sub-assembly.
Remove the O-ring from the transmission oil filler tube sub-assembly.
Disconnect the starter connector.

Remove the nut and disconnect the starter wire.
A/T:

Remove the 2 nuts, bolt, and disconnect the ground cable.
M/T:

Remove the nut, bolt, and disconnect the ground cable.
Remove the starter.

