2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

B278058E01
  1. Slightly bend the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    Text in Illustration 
    *1
    Stopper

  1. B278059E01
    Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.
    Text in Illustration 
    *1
    Hinge


3. REMOVE 4WD CONTROL ECU (w/ A.D.D.)

A151313
  1. Disconnect the connector.

  1. Remove the bolt and control ECU.


4. REMOVE TURBO MOTOR DRIVER

A151314
  1. Disconnect the connector.

  1. Remove the bolt and turbo motor driver.


5. REMOVE TRANSMISSION CONTROL ECU ASSEMBLY (for Automatic Transmission)

A151315
  1. Disconnect the 3 connectors.

  1. Remove the 2 bolts and TCM.


6. REMOVE ECM

A151316
  1. Disconnect the 4 connectors.

  1. Remove the bolt, 2 nuts and ECM.


7. REMOVE NO. 1 ECM BRACKET

A122795E01
  1. Remove the 3 screws and bracket.


8. REMOVE NO. 2 ECM BRACKET

A122796E01
  1. Remove the 2 screws and bracket.

← COMPONENTS (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →