2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
(Click here)

2. REMOVE 4WD CONTROL ECU
  1. Disconnect the connector.

  1. C240333E01
    Remove the bolt and 4WD control ECU.
    Text in Illustration 
    *A
    for LHD
    *A
    for RHD


3. REMOVE TRANSMISSION CONTROL ECU (for Automatic Transmission)
  1. Disconnect the 3 connectors.

  1. A260809E01
    Remove the 2 bolts and transmission control ECU.
    Text in Illustration 
    *A
    for RHD
    *B
    for LHD


4. REMOVE ECM

  1. A254225E01
    Disconnect the 6 ECM connectors and detach the 3 clamps.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD

  1. Remove the bolt, 2 nuts and ECM.


5. REMOVE NO. 1 ECM BRACKET

  1. A254227E01
    Remove the 2 screws and No. 1 ECM bracket.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD


6. REMOVE NO. 2 ECM BRACKET

  1. A254226E01
    Remove the 2 screws and No. 2 ECM bracket.
    Text in Illustration 
    *A
    for LHD
    *B
    for RHD

← COMPONENTS (from Jun 2011)INSTALLATION (from Jun 2011) →