2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE NO. 1 ENGINE UNDER COVER

3. REMOVE NO. 2 ENGINE UNDER COVER

4. REMOVE CRANKSHAFT POSITION SENSOR
  1. Disconnect the sensor connector.

  1. Remove the 3 clips, bolt and sensor.

    A112048

← COMPONENTS (from Jun 2011)INSPECTION (from Jun 2011) →