INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT ENGINE COOLANT TEMPERATURE SENSOR |


Measure the resistance between the terminals.
- Standard resistance:
Condition
Specified Condition
Approx. 20°C (68°F)
2.32 k to 2.59 Ω
Approx. 80°C (176°F)
0.310 k to 0.326 kΩ
- If the result is not as specified, replace the sensor.
- NOTICE:
- When checking the ECT sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.
