2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT ENGINE COOLANT TEMPERATURE SENSOR

A108624E02
  1. Measure the resistance between the terminals.

    Standard resistance:
    Condition
    Specified Condition
    Approx. 20°C (68°F)
    2.32 k to 2.59 kΩ
    Approx. 80°C (176°F)
    0.310 k to 0.326 kΩ

    1. If the result is not as specified, replace the sensor.

    NOTICE:
    When checking the ECT sensor in the water, keep the terminals dry. After the check, wipe the sensor dry.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →