INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT VACUUM SWITCHING VALVE (for EGR Cut) |
Measure the resistance of the VSV.

- Standard resistance:
Tester Connection
Specified Condition
1 - 2
37 to 44 Ω at 20°C (68°F)
1 - Body Ground
2 - Body Ground
1 MΩ or higher
Check operation of the VSV.

Check that air does not flow from port E to the filter.
If the result is not as specified, replace the vacuum switching valve.
Apply battery voltage across terminals 1 and 2.

Check that air flows from port E to the filter.
If the result is not as specified, replace the vacuum switching valve.
