2014 Hilux · Service Manual
ENGINE
Home
›
ENGINE
› 2TR-FE EMISSION CONTROL › AIR FUEL RATIO SENSOR (w/ Secondary Air Injection System)
INSPECTION
Inspection
·
Vehicles built from Jun 2011
INSPECT AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
Measure the resistance between terminals 1 (HT) and 2 (+B) of the sensor.
Standard resistance:
1.8 to 3.4 Ω at 20°C (68°F)
If the result is not as specified, replace the air fuel ratio sensor.
← REMOVAL (from Jun 2011)
INSTALLATION (Jun 2011 – Jul 2012) →