2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE MANIFOLD STAY
  1. Disconnect the 3 vacuum hoses from the 2 VSV.

  1. A148131
    Remove the 2 bolts and stay.


3. REMOVE OIL DIPSTICK GUIDE

A148132
  1. Remove the bolt and injection pipe clamp.

  1. Remove the bolt and guide.

  1. Remove the O-ring from the guide.


4. REMOVE EGR COOLER
  1. Remove the EGR cooler (Click here).


5. REMOVE NO. 3 INTERCOOLER SUPPORT BRACKET

  1. A149935
    Remove the bolt and support bracket.


6. REMOVE VACUUM CONTROL VALVE SET

  1. A149960
    Disconnect the 2 connectors and 3 vacuum hoses.

  1. Remove the 2 bolts and vacuum control valve set.


7. REMOVE NO. 4 INJECTION PIPE SUB-ASSEMBLY

  1. A152275
    Remove the bolt and disconnect the injection pipe clamp.

  1. A152276E02
    Using a 17 mm union nut wrench, loosen the union nuts and remove the No. 4 injection pipe.


8. REMOVE NO. 2 NOZZLE LEAKAGE PIPE ASSEMBLY
  1. Disconnect the 3 fuel hoses.

  1. A152338
    Remove the check valve, 3 bolts, leakage pipe and gasket.


9. REMOVE INTAKE MANIFOLD INSULATOR

  1. A149964
    Remove the 2 bolts and insulator from the manifold.


10. REMOVE INTAKE MANIFOLD

  1. A149936
    Disconnect the common rail sub-harness connector from the intake manifold.

  1. A149965
    Remove the 2 nuts, 4 bolts, intake manifold and gasket.

← COMPONENTS (from Jun 2011)INSPECTION (from Jun 2011) →