2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT THERMOSTAT

HINT:
G035894E01
The valve opening temperature is inscribed on the thermostat.

  1. Immerse the thermostat in water and then gradually heat the water.

  1. Check the valve opening temperature.

    Standard valve opening temperature:
    80 to 84°C (176 to 183°F)

    1. If the valve opening temperature is not within the specified range, replace the thermostat.

  1. A224964E01
    Check the valve lift.

    Standard valve lift:
    10 mm (0.39 in.) or more at 95°C (203°F)

    Text in Illustration 
    *1
    Valve Lift
    If the valve lift is not as specified, replace the thermostat.

  1. Check that the valve is fully closed when the thermostat is below 77°C (171°F).
    If the valve is not fully closed, replace the thermostat.

← REMOVAL (from Aug 2012)INSTALLATION (Jun 2011 – Jul 2012) →