DISASSEMBLY
Removal / installation · Vehicles built from Jun 2011
| 1.
REMOVE INTAKE VALVE |
 |
- Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
- SST
- 09202-70020
09202-00020
Remove the spring retainer, compression spring, valve and spring seat.
- HINT:
- Arrange the valves, compression springs, spring seats and spring retainers in the correct order.
| 2.
REMOVE EXHAUST VALVE |
 |
- Using SST, compress the compression spring and remove the 2 valve spring retainer locks.
- SST
- 09202-70020
09202-00020
Remove the spring retainer, compression spring, valve and spring seat.
- HINT:
- Arrange the valves, compression springs, spring seats and spring retainers in the correct order.
| 3.
REMOVE INTAKE VALVE STEM OIL SEAL |
 |
- Using needle-nose pliers, remove the intake valve stem oil seal.
| 4.
REMOVE EXHAUST VALVE STEM OIL SEAL |
 |
Using needle-nose pliers, remove the exhaust valve stem oil seal.
| 5.
REMOVE SEMICIRCULAR PLUG |
|
| 6.
REMOVE NO. 1 STRAIGHT SCREW PLUG |
 |
- HINT:
- If a No. 1 straight screw plug is corroded, replace it.
Using a 6 mm hexagon wrench, remove the No. 1 straight screw plugs.
| 7.
REMOVE STUD BOLT |
 |
- HINT:
- If a stud bolt is deformed or the threads are damaged, replace it.
Remove the stud bolts.