INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
INSTALL TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) |
 |
- Connect the connector.
Push in the transponder key amplifier in the direction indicated by the arrow in the illustration to install it.
| 2.
INSTALL KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System) |
 |
- Connect the connector.
Push in the key cylinder light assembly in the direction indicated by the arrow in the illustration to install it.
| 3.
INSTALL STEERING COLUMN COVER UPPER |
|
| 4.
INSTALL STEERING COLUMN COVER LOWER
|
 |
Install the cover lower with the 3 screws.
| 5.
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
|
 |
Attach the 3 guides, 2 claws and 3 clips to install the lower instrument panel finish panel.