INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) |
Apply battery voltage to the connector and check the LED illumination.

- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 6
LED illuminates
Text in Illustration *a
Component without harness connected
(Transponder Key Amplifier)
| INSPECT KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System) |
Apply battery voltage to the connector and check the LED illumination.

- OK:
Measurement Condition
Specified Condition
Battery positive (+) → Terminal 2
Battery negative (-) → Terminal 6
Key cylinder light assembly comes on
Text in Illustration *a
Component without harness connected
(Key Cylinder Light Assembly)
