REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
| 1.
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
|
 |
Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.
| 2.
REMOVE STEERING COLUMN COVER LOWER
|
 |
Remove the 3 screws and cover lower.
| 3.
REMOVE STEERING COLUMN COVER UPPER
|
 |
Remove the 3 screws and cover lower.
| 4.
REMOVE TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) |
 |
- Using a screwdriver, detach the claw transponder key amplifier in the direction indicated by the arrow in the illustration and remove it.
Disconnect the connector.
| 5.
REMOVE KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System) |
 |
- Using a screwdriver, detach the claw key cylinder light assembly in the direction indicated by the arrow in the illustration and remove it.
Disconnect the connector.