INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT FUEL SUPPLY PUMP ASSEMBLY |
Inspect the suction control valve.

Text in Illustration *1
Suction Control Valve
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
1.9 to 2.3 Ω
Inspect the fuel temperature sensor.

Text in Illustration *1
Fuel Temperature Sensor
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
2.32 to 2.59 kΩ
