2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT FUEL SUPPLY PUMP ASSEMBLY

  1. A191340E08
    Inspect the suction control valve.
    Text in Illustration 
    *1
    Suction Control Valve

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      1.9 to 2.3 Ω

      If the result is not as specified, replace the fuel supply pump assembly.

  1. A231754E03
    Inspect the fuel temperature sensor.
    Text in Illustration 
    *1
    Fuel Temperature Sensor

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      2.32 to 2.59 kΩ

      If the result is not as specified, replace the fuel supply pump assembly.

← REMOVAL (from Aug 2013)INSTALLATION (Jun 2011 – Jul 2012) →