INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT VACUUM SWITCHING VALVE ASSEMBLY (for EVAP) |
![]() ![]() |
Measure the resistance of the switching valve.

- Standard:
Tester Connection
Specified Condition
1 - 2
26 to 30 Ω at 20°C (68°F)
1 - Body Ground
2 - Body Ground
10 MΩ or higher
Check operation of the switching valve.

Check that air does not flow from port E to port F.
Apply battery voltage across terminals 1 and 2.

Check that air flows from port E to port F.
If the result is not as specified, replace the switching valve.

