2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)

A112022E01
  1. Disconnect the sensor connector.

  1. Using SST, remove the sensor from the front exhaust pipe.

    SST
    09224-00010  


3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)

A112020E01
  1. Disconnect the sensor connector.

  1. Using SST, remove the sensor from the front exhaust pipe.

    SST
    09224-00010  

← ON-VEHICLE INSPECTION (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →