REPLACEMENT
Removal / installation · Vehicles built from Jun 2011
| 1.
REPLACE ENGINE FRONT OIL SEAL |
 |
Using a screwdriver and hammer, tap out the oil seal.
- Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.
- SST
- 09214-76011
Apply MP grease to the lip of the oil seal.
| 2.
REPLACE SUPPLY PUMP OIL SEAL |
 |
- Using a screwdriver and hammer, tap out the oil seal.
Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.
- SST
- 09223-15020
09502-12010
09950-70010
(09951-07100)
Apply MP grease to the lip of the oil seal.