2014 Hilux · Service Manual ENGINE

REPLACEMENT

Removal / installation · Vehicles built from Jun 2011


1. REPLACE ENGINE FRONT OIL SEAL

A058121E01
  1. Using a screwdriver and hammer, tap out the oil seal.

  1. A058119E01
    Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.
    SST
    09214-76011  

  1. Apply MP grease to the lip of the oil seal.


2. REPLACE SUPPLY PUMP OIL SEAL

A058117E01

  1. A058118E01
    Using a screwdriver and hammer, tap out the oil seal.

  1. Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing gear cover edge.

    SST
    09223-15020  
    09502-12010  
    09950-70010   (09951-07100)

  1. Apply MP grease to the lip of the oil seal.

← INSPECTION (from Jun 2011)REASSEMBLY (from Jun 2011) →