INSTALLATION
Removal / installation · Vehicles built from Jun 2011
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
- Use the same procedure for the RH and LH sides.
| 1. INSTALL FRONT FENDER MUDGUARD LH |
w/o Outside Moulding:
Install the front fender mudguard with the 3 screws.
w/ Outside Moulding:
Install the front fender mudguard with the 4 screws.
| 2. INSTALL REAR QUARTER PANEL MUDGUARD LH |
Install the rear quarter panel mudguard with the 4 screws.
