REMOVAL
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. REMOVE SWITCH BASE |
![]() ![]() |
Detach the 8 claws.
- HINT:
- If the claws are difficult to detach, detach the claws from the back of the switch base.
Disconnect the connectors and remove the switch base..
| 2. REMOVE CIGARETTE LIGHTER COVER |
Detach the 2 claws and remove the cover.

| 3. REMOVE CIGARETTE LIGHTER ASSEMBLY |
Rotate the cigarette lighter socket to disengage the cigarette lighter bezel stay's notch from the socket hole.

- NOTICE:
- Do not damage the bulb terminal.
Pull out the socket halfway.
Align the socket with the stay's grooves and remove the socket.

