REMOVAL
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY |
| 3. REMOVE WITH HOLDER ANTENNA ASSEMBLY |
Disconnect the connector.

Text in Illustration *a
LHD only
for RHD:
Remove the 2 screws.
for LHD:
Remove the 2 screws and detach the clamp.
Remove the antenna as shown in the illustration.
- HINT:
- Fully extend the antenna pole before removing the antenna.
