INSTALLATION
Removal / installation · Vehicles built from Aug 2013
Versions by build date: Jun 2011 – Jul 2013 from Aug 2013
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL DOOR CONTROL RECEIVER |
Attach the clamp and connect the connector.
Install the door control receiver with the nut.
| 2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
![]() ![]() |
Attach the 2 hinges to install the glove compartment door.
Text in Illustration *1
Hinge
While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

Text in Illustration *1
Stopper

