INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT QUICK HEATER ASSEMBLY |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 (B) - 1(E)
Always
Below 1 kΩ
2 (B) - 1 (E)
2 (B) - 2 (E)
3 (B) - 2 (E)
Text in Illustration *a
Component without harness connected
(Quick Heater Assembly (PTC Heater Assembly))


