INSTALLATION
Removal / installation · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
| 1.
INSTALL INTAKE AIR TEMPERATURE SENSOR |
 |
- Using a 22 mm deep socket wrench, install a new gasket and the IAT sensor.
-
Torque:
- 29 N*m{
296 kgf*cm
, 21 ft.*lbf
}
Connect the IAT sensor connector.
| 2.
INSTALL ENGINE COVER SUB-ASSEMBLY |
 |
Install the cover with the 3 bolts and 2 nuts.
-
Torque:
- 7.0 N*m{
71 kgf*cm
, 62 in.*lbf
}
| 3.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
|
| 4.
PERFORM INITIALIZATION |
 |
Perform initialization (Click here).
- NOTICE:
- Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.