2014 Hilux · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from Jun 2011


1. INSTALL INTAKE AIR TEMPERATURE SENSOR
  1. Using a 22 mm deep socket wrench, install a new gasket and the intake air temperature sensor.

    Torque:
    29 N*m{ 300 kgf*cm , 22 ft.*lbf }

  1. Connect the intake air temperature sensor connector and glow plug connector.

  1. Attach the clamp.


2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
  1. Install the engine cover with the 3 bolts and 2 cap nuts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

← INSPECTION (from Jun 2011)ON-VEHICLE INSPECTION (from Jun 2011) →