2014 Hilux · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Jun 2011


INSPECT INTAKE AIR TEMPERATURE SENSOR

A108624E02
  1. Measure the resistance between the terminals.

    Standard resistance:
    2.21 k to 2.65 kΩ at 20°C (68°F)

    If the result is not as specified, replace the sensor.

    NOTICE:
    When checking the ECT sensor in water, keep the terminals dry. After the check, wipe the sensor dry.

← REMOVAL (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →