Removal / installation · Vehicles built from Jun 2011
1.
REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.
Text in Illustration
Cap Nut
2.
REMOVE INTAKE AIR TEMPERATURE SENSOR
Detach the clamp.
Disconnect the intake air temperature sensor connector and glow plug connector.
Using a 22 mm deep socket wrench, remove the intake air temperature sensor.
HINT:
Replace the intake air temperature sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the intake air temperature sensor each time the intercooler is replaced.