2014 Hilux · Service Manual ENGINE

REPAIR

Removal / installation · Vehicles built from Jun 2011


1. REPAIR INTAKE VALVE SEAT

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free of foreign matter.
  3. Take off the cutter gradually to make the intake valve seat smooth.

  1. A053831E14
    If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.
    Text in Illustration 
    *a
    1.2 to 1.6 mm (0.047 to 0.063 in.)

  1. A053832E13
    If the seating is too low on the valve face, use 70 and 45° cutters to correct the seat.
    Text in Illustration 
    *a
    1.2 to 1.6 mm (0.047 to 0.063 in.)

  1. A059928E01
    Hand-lap the valve and valve seat with an abrasive compound.

  1. Clean the valve and valve seat.


2. REPAIR EXHAUST VALVE SEAT

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free of foreign matter.
  3. Take off the cutter gradually to make the exhaust valve seat smooth.

  1. A053831E15
    If the seating is too high on the valve face, use 25 and 45° cutters to correct the seat.
    Text in Illustration 
    *a
    1.6 to 2.0 mm (0.063 to 0.079 in.)

  1. A053832E14
    If the seating is too low on the valve face, use 75 and 45° cutters to correct the seat.
    Text in Illustration 
    *a
    1.6 to 2.0 mm (0.063 to 0.079 in.)

  1. A058111E01
    Hand-lap the valve and valve seat with an abrasive compound.

  1. Clean the valve and valve seat.

← INSTALLATION (from Aug 2013)COMPONENTS (Jun 2011 – Jul 2012) →