2014 Hilux · Service Manual ENGINE

REPAIR

Removal / installation · Vehicles built Jun 2011 – Jul 2012

Versions by build date: Jun 2011 – Jul 2012 from Aug 2012


1. BORE CYLINDER

HINT:
  1. Bore all 4 cylinders for the O/S piston outside diameter.
  2. Replace all the piston rings with ones to match the O/S pistons.

  1. Keep 4 new O/S pistons.

    O/S 0.50 piston diameter:
    92.42 to 92.45 mm (3.6386 to 3.6398 in.)

  1. Using a micrometer, measure the piston diameter at right angles to the piston center line, the indicated distance from the piston head.

    A149762E01

    Distance:
    65.0 mm (2.56 in.)

  1. Calculate how much each cylinder needs to be rebored:

    Size to be rebored:
    Size to be rebored = P + C - H
    P = Piston diameter
    C = Piston clearance: 0.070 to 0.090 mm (0.0028 to 0.0035 in.)
    H = Allowance for honing: 0.02 mm (0.0008 in.) or less

  1. Bore and hone the cylinders to calculated dimensions.

    Maximum honing:
    0.02 mm (0.0008 in.)

    NOTICE:
    Excess honing will destroy the finished roundness.

← REASSEMBLY (from Aug 2012)REPAIR (from Aug 2012) →