REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 4 bolts and No. 1 under cover.
| 2. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the cylinder block drain cock plug and radiator drain cock plug, and then drain the coolant.
- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.


| 3. DISCONNECT RADIATOR HOSE INLET |
| 4. DISCONNECT RADIATOR HOSE OUTLET |
| 5. REMOVE AIR PUMP INLET (w/ Secondary Air Injection System) |
Remove the bolt and disconnect the pump inlet.

| 6. REMOVE FAN SHROUD |
![]() ![]() |
Disconnect the reservoir hose from the radiator tank upper.
Loosen the 4 nuts holding the fluid coupling fan.
Remove the drive belt.
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
- NOTICE:
- Be careful not to damage the radiator core.
Remove the fan pulley from the water pump.
| 7. REMOVE FAN |
Remove the 4 nuts and fan from the coupling.


