REMOVAL
Removal / installation · Vehicles built from Aug 2012
Versions by build date: Jun 2011 – Jul 2012 from Aug 2012
| 1. REMOVE NO. 1 ENGINE UNDER COVER |
Remove the 4 bolts and under cover.
| 2. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the cylinder block drain cock plug and radiator drain plug, and then the coolant.
- HINT:
- Collect the coolant in a container and dispose of it according to the regulations in your area.


| 3. DISCONNECT RADIATOR HOSE INLET |
| 4. DISCONNECT RADIATOR HOSE OUTLET |
| 5. REMOVE FAN SHROUD |
![]() ![]() |
Disconnect the radiator reservoir hose from the radiator tank upper.
Loosen the 4 nuts holding the fluid coupling fan.
Remove the driver belt (Click here).
Remove the 2 bolts holding the fan shroud.
Remove the 4 nuts of the fluid coupling fan, and then remove the shroud together with the coupling fan.
- NOTICE:
- Be careful not to damage the radiator core.
Remove the fan pulley from the water pump.
| 6. REMOVE FAN |
Remove the 4 nuts and fan from the fluid coupling.


