INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT LEVEL WARNING SWITCH |
 |
Measure the resistance of the switch.
- Standard resistance:
Tester Connection
|
Switch Condition
|
Specified Condition
|
1 - 2
|
ON
|
Below 1 Ω
|
1 - 2
|
OFF
|
10 kΩ or higher
|
If the result is not as specified, replace the fuel filter.
| INSPECT CLOGGING SWITCH |
 |
Measure the resistance between the terminals.
- Standard resistance:
- Below 1 Ω at 20°C (68°F)
If the result is not as specified, replace the fuel filter.