ON-VEHICLE INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT VACUUM SWITCHING VALVE ASSEMBLY (for ACIS) |
Measure the VSV resistance.

- Standard resistance:
Tester Connection
Specified Condition
1 - 2
33 to 39 Ω at 20°C (68°F)
1 - Body ground
2 - Body ground
1 MΩ or higher
Check the VSV operation.
Check that air flows from port E to the filter.

If the result is not as specified, replace the VSV assembly.
Apply battery voltage across the terminals.

Check that air flows from port E to F.
If the result is not as specified, replace the VSV assembly.
