2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

  1. A135916
    Remove the 3 bolts, 2 nut and engine cover.


3. REMOVE INTAKE AIR TEMPERATURE SENSOR

  1. A135914
    Disconnect the IAT sensor connector.

  1. Using a 22 mm deep socket wrench, remove the IAT sensor.

    HINT:
    Replace the IAT sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the IAT sensor each time the intercooler is replaced.


4. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

  1. A150479
    Detach the 2 clamps and disconnect the sensor connector.

  1. Remove the 2 bolts and sensor.


5. REMOVE INTERCOOLER ASSEMBLY

  1. A149933
    Loosen the 2 hose clamps of the No. 1 air hose.

  1. A149934
    Loosen the 2 hose clamps of the No. 2 air hose.

  1. A135919
    Remove the 4 bolts and intercooler.

  1. A149931
    Remove the 4 bolts, intake air connector and gasket.

← COMPONENTS (from Jun 2011)INSTALLATION (Jun 2011 – Jul 2012) →