2014 Hilux · Service Manual ENGINE

REMOVAL

Removal / installation · Vehicles built from Jun 2011


1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

  1. A254063
    Remove the 3 bolts, 2 cap nuts and No. 1 engine cover.
    Text in Illustration 
    V100136
    Cap Nut


2. REMOVE INTAKE AIR TEMPERATURE SENSOR

  1. A253487
    Detach the clamp.

  1. Disconnect the intake air temperature sensor connector and glow plug connector.

  1. Using a 22 mm deep socket wrench, remove the intake air temperature sensor.

    HINT:
    Replace the intake air temperature sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the intake air temperature sensor each time the intercooler is replaced.


3. REMOVE INTERCOOLER ASSEMBLY

  1. A253488
    Loosen the 2 hose clamps of the No. 1 air hose.

  1. A253489
    Loosen the 2 hose clamps of the No. 2 air hose.

  1. A253490
    Remove the 4 bolts and intercooler.

  1. A254052
    Remove the 4 bolts, intake air connector and gasket.

← COMPONENTS (from Jun 2011)INSTALLATION (from Jun 2011) →