REMOVAL
Removal / installation · Vehicles built from Jun 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
| 2. REMOVE V-BANK COVER |
Remove the 2 nuts and the V-bank cover.

| 3. REMOVE AIR CLEANER ASSEMBLY |
Disconnect the vacuum hose.

Disconnect the MAF meter connector.
Remove the 2 wire harness clamps.
Loosen the 2 hose clamps.

Remove the 2 bolts and air cleaner.
| 4. REMOVE IGNITION COIL ASSEMBLY |
Disconnect the connector.
Remove the bolt and ignition coil.

| 5. REMOVE SPARK PLUG |
Remove the 6 spark plugs.
