2014 Hilux · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built from Jun 2011


1. REMOVE COOLER BRACKET

E225741
  1. Detach the clamp.

  1. Remove the screw and cooler bracket.


2. REMOVE MAGNET CLUTCH ASSEMBLY

E213723E02
  1. Clamp the cooler compressor in a vise between aluminum plates.

  1. Connect the battery to the magnet clutch assembly as shown in the illustration to fix the hub and rotor in place.

  1. Wrap the drive belt around the rotor and securely hold it in place by hand.

  1. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

    HINT:
    There is no set number of magnet clutch washers since they are used for adjusting.

    Text in Illustration 
    *1
    Battery

  1. E155202
    Using a snap ring expander, remove the snap ring and magnet clutch rotor.

    NOTICE:
    Do not damage the seal cover of the bearing when removing the snap ring.

  1. E155203
    Using a snap ring expander, remove the snap ring and magnet clutch stator.

← REMOVAL (from Jun 2011)INSPECTION (from Jun 2011) →