2014 Hilux · Service Manual ENGINE

P0607 Control Module Performance

Diagnostic trouble codes · Vehicles built Aug 2012 – Jul 2013

Also covers:

Versions by build date: Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
P0607
P1611
ECM internal error
(1 trip detection logic)
  1. ECM

INSPECTION PROCEDURE

NOTICE:
If the ECM is replaced, the new ECM needs registration (Click here) and initialization (Click here).

HINT:
Read freeze frame data using the intelligent tester. The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


1. REPLACE ECM

NEXT

END


← P0606 ECM / PCM Processor (+ P0607, P1611) (Jun 2011 – Jul 2012)P0607 Control Module Performance (+ P1611) (Aug 2013 – Jul 2014) →