TERMINALS OF ECU
System information · Vehicles built from Jun 2011
- HINT:
- Each ECU terminal's standard voltage is shown in the table below.
- In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to be inspected. The standard voltage between the terminals is shown under "Specified Condition".
- Use the illustration below as a reference for the ECU terminals.
| ECM (w/ DPF) |


| Terminal No. (Symbols) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| E24-26 (NSW) - E25-1 (E1) |
L-Y - BR |
Park/neutral position switch signal |
Ignition switch ON and shift lever on P or N |
Below 3 V |
| E24-26 (NSW) - E25-1 (E1) |
L-Y - BR |
Park/neutral position switch signal |
Ignition switch ON and shift lever not on P or N |
11 to 14 V |
| E31-8 (STP) - E25-1 (E1) |
G-W - BR |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| E31-8 (STP) - E25-1 (E1) |
G-W - BR |
Stop light switch signal |
Brake pedal is released |
Below 1.5 V |
| E27-13 (VC) - E25-1 (E1) |
R-W - BR |
Power source of sensor (specific voltage) |
Ignition switch ON |
4.5 to 5.5 V |
| E31-24 (+B) - E25-1 (E1) |
B - BR |
Power source of ECM |
Ignition switch ON |
11 to 14 V |
| E24-24 (CAN+) - E25-1 (E1) |
V - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (see waveform 8) |
| E24-18 (CAN-) - E25-1 (E1) |
P - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (see waveform 9) |
| ECM (w/o DPF) |


| Terminal No. (Symbols) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| E5-6 (NSW) - E7-7 (E1) |
L-Y - BR |
Park/neutral position switch signal |
Ignition switch ON and shift lever on P or N |
Below 3 V |
| E5-6 (NSW) - E7-7 (E1) |
L-Y - BR |
Park/neutral position switch signal |
Ignition switch ON and shift lever not on P or N |
11 to 14 V |
| E6-15 (STP) - E7-7 (E1) |
G-W - BR |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| E6-15 (STP) - E7-7 (E1) |
G-W - BR |
Stop light switch signal |
Brake pedal is released |
Below 1.5 V |
| E8-18 (VC) - E7-7 (E1) |
R-W - BR |
Power source of sensor (specific voltage) |
Ignition switch ON |
4.5 to 5.5 V |
| E5-1 (+B) - E7-7 (E1) |
B - BR |
Power source of ECM |
Ignition switch ON |
11 to 14 V |
| E6-22 (CAN+) - E7-7 (E1) |
V - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (see waveform 8) |
| E6-21 (CAN-) - E7-7 (E1) |
P - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (see waveform 9) |
| TCM |


| Terminal No. (Symbols) |
Wiring Color |
Terminal Description |
Condition |
Specified Condition |
| T38-5 (BATT) - T19-1 (E1) |
L - BR |
Battery (for measuring battery voltage and for TCM memory) |
Always |
11 to 14 V |
| T19-12 (NSW) - T19-1 (E1) |
L-Y - BR |
Park/neutral position switch signal |
Ignition switch ON and shift lever on P or N |
Below 3 V |
| T19-12 (NSW) - T19-1 (E1) |
L-Y - BR |
Park/neutral position switch signal |
Ignition switch ON and shift lever not on P or N |
11 to 14 V |
| T19-11 (STA) - T19-1 (E1) |
B-Y - BR |
Starter signal |
Cranking |
6 V or higher |
| T37-9 (R) - T19-1 (E1) |
R-Y - BR |
R shift position switch signal |
Ignition switch ON and shift lever on R |
11 to 14 V |
| T37-9 (R) - T19-1 (E1) |
R-Y - BR |
R shift position switch signal |
Ignition switch ON and shift lever not on R |
Below 1.5 V |
| T37-8 (D) - T19-1 (E1) |
G-Y - BR |
D shift position switch signal |
Ignition switch ON and shift lever on D or 4 |
11 to 14 V |
| T37-8 (D) - T19-1 (E1) |
G-Y - BR |
D shift position switch signal |
Ignition switch ON and shift lever not on D or 4 |
Below 1.5 V |
| T37-13 (4) - T19-1 (E1) |
G-O - BR |
4 shift position switch signal |
Ignition switch ON and shift lever on 4 |
11 to 14 V |
| T37-13 (4) - T19-1 (E1) |
G-O - BR |
4 shift position switch signal |
Ignition switch ON and shift lever not on 4 |
Below 1.5 V |
| T37-12 (3) - T19-1 (E1) |
L - BR |
3 shift position switch signal |
Ignition switch ON and shift lever on 3 |
11 to 14 V |
| T37-12 (3) - T19-1 (E1) |
L - BR |
3 shift position switch signal |
Ignition switch ON and shift lever not on 3 |
Below 1.5 V |
| T37-11 (2) - T19-1 (E1) |
G-R - BR |
2 shift position switch signal |
Ignition switch ON and shift lever on 2 |
11 to 14 V |
| T37-11 (2) - T19-1 (E1) |
G-R - BR |
2 shift position switch signal |
Ignition switch ON and shift lever not on 2 |
Below 1.5 V |
| T37-10 (L) - T19-1 (E1) |
GR-L - BR |
L shift position switch signal |
Ignition switch ON and shift lever on L |
11 to 14 V |
| T37-10 (L) - T19-1 (E1) |
GR-L - BR |
L shift position switch signal |
Ignition switch ON and shift lever not on L |
Below 1.5 V |
| T19-18 (S1) - T19-1 (E1) |
GR - BR |
S1 solenoid signal |
1st or 2nd gear |
11 to 14 V |
| T19-18 (S1) - T19-1 (E1) |
GR - BR |
S1 solenoid signal |
3rd, 4th or 5th gear |
Below 1.5 V |
| T19-17 (S2) - T19-1 (E1) |
W-L - BR |
S2 solenoid signal |
2nd or 3rd gear |
11 to 14 V |
| T19-17 (S2) - T19-1 (E1) |
W-L - BR |
S2 solenoid signal |
1st, 4th or 5th gear |
Below 1.5 V |
| T19-16 (SR) - T19-1 (E1) |
G - BR |
SR solenoid signal |
5th gear |
11 to 14 V |
| T19-16 (SR) - T19-1 (E1) |
G - BR |
SR solenoid signal |
1st gear |
Below 1.5 V |
| T19-9 (SL1+) - T19-8 (SL1-) |
GR - V |
SL1 solenoid signal |
Engine is idling |
Pulse generation (see waveform 1) |
| T19-7 (SL2+) - T19-6 (SL2-) |
W - R-W |
SL2 solenoid signal |
Engine is idling |
Pulse generation (see waveform 2) |
| T19-20 (SLT+) - T19-19 (SLT-) |
G-Y - L-B |
SLT solenoid signal |
Engine is idling |
Pulse generation (see waveform 3) |
| T19-22 (SLU+) - T19-21 (SLU-) |
B - Y |
SLUT solenoid signal |
4th (lock-up) or 5th (lock-up) gear |
Pulse generation (see waveform 4) |
| T19-25 (THO1) - T19-23 (E2) |
L - G |
No. 1 ATF temperature sensor signal |
ATF temperature: 115°C (239°F) or more |
Below 1.5 V |
| T19-24 (THO2) - T19-23 (E2) |
BR - G |
No. 2 ATF temperature sensor signal |
ATF temperature: 115°C (239°F) or more |
Below 1.5 V |
| T38-14 (STP) - T19-1 (E1) |
G-W - BR |
Stop light switch signal |
Brake pedal is depressed |
7.5 to 14 V |
| T38-14 (STP) - T19-1 (E1) |
G-W - BR |
Stop light switch signal |
Brake pedal is released |
Below 1.5 V |
| T19-3 (NT+) - T19-2 (NT-) |
V - P |
Speed sensor (NT) signal |
Engine is idling |
Pulse generation (see waveform 5) |
| T19-30 (SP2+) - T19-29 (SP2-) |
R - G |
Speed sensor (SP2) signal |
Vehicle speed 20 km/h (12 mph) |
Pulse generation (see waveform 6) |
| T37-15 (L4) - T19-1 (E1) |
G-W - BR |
L4 shift position switch signal |
Ignition switch ON and transfer shift lever on L4 |
11 to 14 V |
| T37-15 (L4) - T19-1 (E1) |
G-W - BR |
L4 shift position switch signal |
Ignition switch ON and transfer shift lever not on L4 |
Below 1.5 V |
| T37-16 (TFN) - T19-1 (E1) |
W-G - BR |
N shift position switch signal |
Ignition switch ON and transfer shift lever on N |
11 to 14 V |
| T37-16 (TFN) - T19-1 (E1) |
W-G - BR |
N shift position switch signal |
Ignition switch ON and transfer shift lever not on N |
Below 1.5 V |
| T38-6 (IG2) - T19-1 (E1) |
B-O - BR |
Ignition switch |
Ignition switch ON |
11 to 14 V |
| T38-25 (SPD1) - T19-1 (E1) |
V-R - BR |
Vehicle speed signal |
Rear wheel turning slowly |
Pulse generation (see waveform 7) |
| T38-21 (CAN+) - T19-1 (E1) |
V - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (see waveform 8) |
| T38-20 (CAN-) - T19-1 (E1) |
P - BR |
CAN communication line |
Ignition switch ON |
Pulse generation (see waveform 9) |
| Waveform 1 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
T19-9 (SL1+) - T19-8 (SL1-) |
| Tool Setting |
5 V/DIV., 1 msec./DIV. |
| Condition |
Engine is idling |
| Waveform 2 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
T19-7 (SL2+) - T19-6 (SL2-) |
| Tool Setting |
5 V/DIV., 1 msec./DIV. |
| Condition |
Engine is idling |
| Waveform 3 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
T19-20 (SLT+) - T19-19 (SLT-) |
| Tool Setting |
5 V/DIV., 1 msec./DIV. |
| Condition |
Engine is idling |
| Waveform 4 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
T19-22 (SLU+) - T19-21 (SLU-) |
| Tool Setting |
5 V/DIV., 1 msec./DIV. |
| Condition |
4th (lock-up) or 5th (lock-up) gear |
| Waveform 5 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
T19-3 (NT+) - T19-2 (NT-) |
| Tool Setting |
1 V/DIV., 2 msec./DIV. |
| Condition |
Engine is idling |
| Waveform 6 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
T19-30 (SP2+) - T19-29 (SP2-) |
| Tool Setting |
2 V/DIV., 20 msec./DIV. |
| Condition |
Vehicle speed 20 km/h (12 mph) |
| Waveform 7 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
T38-25 (SPD1) - T19-1 (E1) |
| Tool Setting |
5 V/DIV., 20 msec./DIV. |
| Condition |
Rear wheel turning slowly |
| Waveform 8 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
E24-24 (CAN+) - E25-1 (E1)*1 E6-22 (CAN+) - E7-7 (E1)*2 T38-21 (CAN+) - T19-1 (E1) |
| Tool Setting |
1 V/DIV., 10 msec./DIV. |
| Condition |
Ignition switch ON |
- *1: w/ DPF
- *2: w/o DPF
| Waveform 9 (Reference) |
![]() ![]() |
| Item |
Content |
| Symbols (Terminal No.) |
E24-18 (CAN-) - E25-1 (E1)*1 E6-21 (CAN-) - E7-7 (E1)*2 T38-20 (CAN-) - T19-1 (E1) |
| Tool Setting |
1 V/DIV., 10 msec./DIV. |
| Condition |
Ignition switch ON |
- *1: w/ DPF
- *2: w/o DPF





