P0191 Fuel Rail Pressure Sensor Circuit Range / Performance
Diagnostic trouble codes · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
DESCRIPTION
Refer to DTC P0087 (Click here).| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0191 |
Voltage output of the fuel pressure sensor for the common rail is out of the standard range (1 trip detection logic) |
Fuel pressure sensor |
INSPECTION PROCEDURE
- NOTICE:
- After replacing the ECM, the new ECM needs registration (Click here) and initialization (Click here).
- HINT:
- If DTCs P0087, P0190, P0192, and P0193 are output simultaneously, the manifold absolute pressure sensor circuit may be open or short. Perform troubleshooting for those DTCs first.
- Read freeze frame data using the intelligent tester. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.
- If DTCs P0087, P0190, P0192, and P0193 are output simultaneously, the manifold absolute pressure sensor circuit may be open or short. Perform troubleshooting for those DTCs first.
| 1. CHECK OTHER DTC OUTPUT |
Connect the intelligent tester to the DLC3.
Turn the ignition switch ON and turn the tester ON.
Enter the following menus: Powertrain / Engine and ECT / DTC.
Read the DTCs.
- Result:
Display (DTC output)
Proceed to
P0191
A
P0191 and other DTCs
B
- HINT:
- If codes other than P0191 are output, perform troubleshooting for those DTCs first.
|
|
||||
| A | ||
| ||
