INSPECTION
Inspection · Vehicles built from Jun 2011
| INSPECT STOP LIGHT SWITCH ASSEMBLY |
![]() ![]() |
| *1 |
Shaft |
| *a |
Component without harness connected Stop Light Switch Assembly) |
| *b |
Not Pushed |
| *c |
Pushed |
Measure the resistance of the switch.
- Standard:
Tester Connection
Switch Condition
Specified Condition
1 - 2
Pin not pushed
Below 1 Ω
3 - 4
Pin not pushed
10 k Ω or higher
1 - 2
Pin pushed
10 k Ω or higher
3 - 4
Pin pushed
Below 1 Ω


