2014 Hilux · Service Manual ENGINE

REPLACEMENT

Removal / installation · Vehicles built from Jun 2011


1. REPLACE GENERATOR DRIVE END FRAME BEARING

  1. A122146
    Remove the 4 screws, bearing retainer and bearing.

  1. A122147E01
    Using SST and a hammer, tap out the bearing.
    SST
    09950-60010   (09951-00250)
    09950-70010   (09951-07100)

  1. A122148E01
    Using SST and a press, press in a new bearing.
    SST
    09950-70010   (09951-07100)
    09950-60010   (09951-00520)

  1. A122146
    Install the bearing retainer with the 4 screws.

    Torque:
    2.3 N*m{ 23 kgf*cm , 20 in.*lbf }

← INSPECTION (from Jun 2011)REASSEMBLY (Jun 2011 – Jul 2013) →