2014 Hilux · Service Manual SERVICE SPECIFICATIONS

SERVICE DATA

Specifications · Vehicles built from Jun 2011

for DPF 
Intake manifold
Vacuum switching valve (for Swirl Control Valve)
Standard resistance
Tester Connection
Condition
Specified Condition
1 - 2
20°C (68°F)
37 to 44 Ω
Manifold absolute pressure sensor
Condition
Tester Connection
Specified Condition
ECM output voltage
3 VC (+) - 1 E2 (-)
4.75 to 5.25 V
Applied vacuum
-
-
13.3 kPa (100 mmHg, 3.94 in.Hg)
E27-5 (PIM +) - E27-14 (E2-)
0.8 to 1.4 V
26.6 kPa (199 mmHg, 7.85 in.Hg)
0.5 to 1.0 V
40 kPa (300 mmHg, 11.81 in.Hg)
0.3 to 0.9 V
Applied pressure
-
-
19.6 kPa (0.20 kgf/cm2, 2.84 psi)
E27-5 (PIM +) - E27-14 (E2-)
1.0 to 1.7 V
39.2 kPa (0.40 kgf/cm2, 5.69 psi)
1.3 to 1.9 V
58.8 kPa (0.60 kgf/cm2, 8.53 psi)
1.5 to 2.2 V
78.5 kPa (0.80 kgf/cm2, 11.4 psi)
1.8 to 2.4 V
98.0 kPa (1.00 kgf/cm2, 14.2 psi)
2.1 to 2.7 V
Turbocharger boost pressure
Standard pressure
5 to 20 kPa (0.05 to 0.2 kgf/cm2, 0.7 to 2.9 psi)
Turbocharger
Axial play of turbine shaft
Maximum axial play
0.11 mm (0.00433 in.)
Radial play of turbine shaft
Maximum radial play
0.112 mm (0.00441 in.)
w/ EGR cooler 
Vacuum switching valve
(for swirl control valve)
Tester Connection
Specified Condition
1 - 2
33 to 39 Ω at 20°C (68°F)
1 - Body ground
2 - Body ground
10 kΩ or higher
Manifold absolute pressure sensor
Condition
Tester Connection
Specified Condition
ECM output voltage
T9-3 (VC (+)) - T9-1 (E2 (-))
4.75 to 5.25 V
Applied vacuum
-
-
13.3 kPa (100 mmHg, 3.94 in.Hg)
E7-28 (PIM) - E8-28 (E2)
0.0 to 0.3 V
26.6 kPa (199 mmHg, 7.85 in.Hg)
0.1 to 0.4 V
40 kPa (300 mmHg, 11.81 in.Hg)
0.2 to 0.6 V
Applied pressure
-
-
19.6 kPa (0.20 kgf/cm2, 2.84 psi)
E7-28 (PIM) - E8-28 (E2)
0.05 to 0.3 V
39.2 kPa (0.40 kgf/cm2, 5.69 psi)
0.25 to 0.55 V
58.8 kPa (0.60 kgf/cm2, 8.53 psi)
0.45 to 0.75 V
78.5 kPa (0.80 kgf/cm2, 11.4 psi)
0.65 to 0.95 V
98.0 kPa (1.00 kgf/cm2, 14.2 psi)
0.9 to 1.2 V
Turbocharger pressure
Condition
Specified Condition
Engine speed (approximately 4600 rpm)
15 to 45 kPa (0.15 to 0.46 kgf/cm2, 2.1 to 6.5 psi)
Turbocharger
Axial play of turbine shaft
Maximum axial play
0.11 mm (0.0043 in.)
Radial play of turbine shaft
Maximum radial play
0.112 mm (0.0044 in.)
w/o EGR cooler 
Intake manifold
(Swirl control valve)
Condition
VSV Condition
Specified Condition
Normal engine speed
ON
Approximately 35 kPa (263 mmHg, 10.35 in.Hg)
3000 rpm or more
OFF
0 kPa (0 mmHg, 0 in.Hg)
Vacuum switching valve
(for swirl control valve)
Tester Connection
Specified Condition
1 - 2
33 to 39 Ω at 20°C (68°F)
1 - Body ground
2 - Body ground
10 kΩ or higher
Manifold absolute pressure sensor
Condition
Tester Connection
Specified Condition
ECM output voltage
T9-3 (VC (+)) - T9-1 (E2 (-))
4.75 to 5.25 V
Applied vacuum
-
-
13.3 kPa (100 mmHg, 3.94 in.Hg)
E7-28 (PIM) - E8-28 (E2)
0.1 to 0.4 V
26.6 kPa (199 mmHg, 7.85 in.Hg)
0.2 to 0.6 V
40 kPa (300 mmHg, 11.81 in.Hg)
0.4 to 0.8 V
Applied pressure
-
-
19.6 kPa (0.20 kgf/cm2, 2.84 psi)
E7-28 (PIM) - E8-28 (E2)
0.1 to 0.4 V
39.2 kPa (0.40 kgf/cm2, 5.69 psi)
0.4 to 0.7 V
58.8 kPa (0.60 kgf/cm2, 8.53 psi)
0.7 to 1.0 V
78.5 kPa (0.80 kgf/cm2, 11.4 psi)
1.0 to 1.3 V
98.0 kPa (1.00 kgf/cm2, 14.2 psi)
1.3 to 1.6 V
Turbocharger pressure
Condition
Specified Condition
Engine speed (approximately 4600 rpm)
15 to 45 kPa (0.15 to 0.46 kgf/cm2, 2.1 to 6.5 psi)
Turbocharger
Axial play of turbine shaft
Maximum axial play
0.11 mm (0.0043 in.)
Radial play of turbine shaft
Maximum radial play
0.112 mm (0.0044 in.)
← TORQUE SPECIFICATIONS (from Jun 2011)TORQUE SPECIFICATIONS (Jun 2011 – Jul 2012) →