TORQUE SPECIFICATIONS
Specifications · Vehicles built Jun 2011 – Jul 2014
Versions by build date: Jun 2011 – Jul 2014 from Aug 2014
| Part tightened |
N*m |
kgf*cm |
ft.*lbf |
||
| Oil pressure switch x Cylinder block |
15 |
153 |
11 |
||
| Oil filter x Oil filter union |
17.2 |
175 |
13 |
||
| Oil drain plug x No. 2 oil pan |
37.5 |
382 |
28 |
||
| Oil pump cover x Timing chain cover |
9.0 |
92 |
80 in.*lbf |
||
| Oil pump relief valve x Timing chain cover |
49 |
500 |
36 |
||
| Water pump x Timing chain cover |
13 |
133 |
10 |
||
| Timing gear case plug x Timing gear case |
16.6 |
169 |
12 |
||
| Timing chain cover x Cylinder block |
Excluding the bolts labeled A and C, tighten the bolts and nuts in this order: Area 1, Area 2 and Area 3. |
21 |
214 |
15 |
|
| Excluding the bolts labeled A, E and F, tighten the bolts and nuts in this order: Area 1, Area 3, Area 2. |
for bolt C |
26 |
265 |
19 |
|
| for bolt B, D and nut |
21 |
214 |
15 |
||
| Tighten the bolts labeled A in this order: Area 2 and Area 3. |
60 |
612 |
44 |
||
| Tighten the bolt labeled F. |
46 |
469 |
34 |
||
| Tighten the bolts labeled E in Area 4. |
21 |
214 |
15 |
||
| No. 1 oil pan x Cylinder block |
26 |
265 |
19 |
||
| Oil strainer x No. 1 oil pan |
20 |
204 |
15 |
||
| No 2 oil pan x No. 1 oil pan |
9.0 |
92 |
80 in.*lbf |
||
| Crank pulley bolt x Crankshaft |
260 |
2,651 |
192 |
||
| Camshaft position sensor x Cylinder head |
8.5 |
87 |
75 in.*lbf |
||
| Cylinder head cover x Cylinder head |
9.0 |
92 |
80 in.*lbf |
||
| No. 1 water by-pass pipe x Timing chain cover |
17.5 |
178 |
13 |
||
| No. 1 idler pulley x Timing chain cover |
43 |
438 |
32 |
||
| V-ribbed belt tensioner x Timing chain cover : for bolt 1 |
40 |
408 |
30 |
||
| V-ribbed belt tensioner x Timing chain cover : for bolt 2 |
21 |
214 |
15 |
||
| V-ribbed belt tensioner x Timing chain cover : for bolt 3 |
43 |
438 |
32 |
||
| Intake manifold x Cylinder head |
25 |
255 |
18 |
||