REMOVAL
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jun 2011 – Jul 2012 Aug 2012 – Jul 2013 from Aug 2013
- HINT:
- Use the same procedure for RHD and LHD vehicles.
- The procedure listed below is for LHD vehicles.
- Use the same procedure for RHD and LHD vehicles.
| 1. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY |
![]() ![]() |
Detach the 2 claws, 3 clips and 3 guides and remove the lower instrument panel finish panel.
| 2. REMOVE COOLER THERMISTOR |
![]() ![]() |
Disconnect the connector and aspirator hose.
Detach the 2 claws and remove the cooler thermistor (room temperature sensor).



