HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Jun 2011 – Jul 2012
Versions by build date: Jun 2011 – Jul 2012 from Aug 2012
- HINT:
- Use these procedures to troubleshoot the theft deterrent system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
| |||||
| 3.PROBLEM SYMPTOMS TABLE |
Refer to Problem Symptoms Table (Click here)
Result Result
Proceed to
Fault is not listed in problem symptoms table
A
Fault is listed in problem symptoms table
B
|
|||||
| |||||
| 4.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (Click here)
| |||||
| 5.REPAIR OR REPLACE |
| |||||
| 6.CONFIRMATION TEST |
| |||||